2011-12-25

Rims

Today I started all over again, the crack in the rim was not welded through so it had to be re-done.
At the same time I had all the largest nicks filled in.


The front rim also welded but not grinded.

There where two large holes for rim locks that I did not want.
Below, welded and grinded using small file and sand paper. One small spot in the weld...


Hopefully the rims will turn out as good as the Borrani rim that I polished several years ago. Still have not had any use for the wheel.


And if I dont find anything else to do, there are more rims waiting

1 comment:

  1. do you have any spare 1,85 did rims? (that you would sell)
    e-mail me at cb-viguur @ hotmail.com

    ReplyDelete